Link ECUs

Link G4 Extreme

The Link G4 Extreme is the flagship ECU from Link Engine Management systems.
The G4 Extreme is specifically aimed at 6 to 8 cylinder engines that require sequential fuel and ignition control.

The Extreme ecu offers

  • eight saturated injection drives
  • eight ignition outputs
  • eight analog inputs
  • four temperature inputs
  • eight digital inputs
  • eight auxiliary outputs*
  • two, thirty four pin, waterproof connectors
  • external, 2.5 bar or 5 bar, MAP sensor (sold separately)

*unused injection and ignition drives can also be used as auxiliary outputs.
 


Link G4 Storm

The G4 Storm offers the latest in high end aftermarket engine management. This popular ECU is a cost effective option for many applications. The Storm delivers the results, retaining all the functions normally demanded by both tuner and driver.

The Storm runs the same powerful microcontroller and firmware as the G4 Xtreme.

  • four injection drives
  • four ignition outputs
  • three/four analog inputs*
  • two temperature inputs
  • three/four digital inputs*
  • eight auxiliary outputs**
  • one, thirty four pin, waterproof connector
  • built in, 4 bar, MAP sensor
  • 5V out
  • USB to Link CAN cable
  • Link CAN connector
  • Spare injection and ignition channels can be auxiliary outputs

*one digital input shares the same pin as one analogue input. Unused injection and ignition drives can also be used as auxiliary outputs.

 


Link G4 Plug-In

The G4 Plug-in is the perfect replacement for your factory ECU. The G4 Plug-in is designed to discretely fit inside the factory ECU enclosure. This ECU allows easy installation and there is no alterations needed to the existing wiring loom.

Once the ECU is fitted the vehicle will need to be tuned on a dyno to get the best possible results from the engine.

There is a wide range of Link G4 Plug-in available for a variety of makes & models of vehicles. Please contact us to see if this is an option for your vehicle.
 

 


Link G4 Atom

The G4 Atom is a great entry level ECU and is half the size of the Extreme & Storm but has all the technology. This ECU runs the same microprocessor and firmware as the Extreme & Storm.

Features of the Atom include:

  • four injection drives
  • four ignition outputs
  • two analog inputs (you choose, oil pressure etc.)
  • two temperature inputs (usually water and inlet air temperature)
  • two digital inputs (e.g. vehicle speed and logging switch - you choose)
  • four auxiliary outputs (e.g. fuel pump, fans, boost control, O2 heater etc.) *
  • one, twenty six pin, waterproof connector
  • built in, 2.5 bar, MAP sensor
  • 5V out

* unused ignition drives can also be used as auxiliary outputs.
 


Link G4 Lightning

The G4 Lightning ECU is an ignition only engine management system.

This ECU offers eight sequential channels of ignition with built in MAP sensor and barometric correction.

  • eight ignition outputs
  • two analog inputs (you choose, oil pressure etc.)
  • two temperature inputs (usually water and inlet air temperature)
  • two digital inputs (e.g. vehicle speed and logging switch - you choose)
  • four auxiliary outputs (e.g. fuel pump, fans, boost control, O2 heater etc.) *
  • one, twenty six pin, waterproof connector
  • built in, 2.5 bar, MAP sensor
  • 5V out


Contact us for more information